Replace that stock intake tube and dress up your engine bay with our high flow intake pipes!
ADTR 96-04 High Flow Intake Pipe
$209.95
Only 2 left in stock (can be backordered)
Description
Replace that stock intake tube and dress up your engine bay with our high flow intake pipes!
- Replaces stock civilian intake tubes and PI intake tubes
- For 96-04 models only! If you need one for an 05-11 model, check out the following link here: ADTR 05-11 Intake Pipe
- Vibrant 4-ply silicone couplers available only in black
- T-bolt clamps are supplied along with all necessary hardware.
- Aluminum mandrel bent 3″ piping and bead rolled
- Includes necessary bungs for breathers and IAC connections
- Pipes are black ceramic coated to help keep intake temperatures down
- Works with civilian 70mm, 80mm or 90mm mass air flow sensors
- Works with stock 65mm and most 70mm or 75mm throttle bodies. ***We suggest measuring your throttle body flange if you have an aftermarket throttle body to make sure it will accept a 3″ diameter silicone coupler. If not please let Chris know when ordering.***
*THESE ARE NOT CA SMOG COMPLIANT AND CAN NOT BE SHIPPED TO CA*
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 8 × 5 × 4 in |
| Brand | ADTR |
| Intake Pipe Mass Air Flow Sizing | 70mm MAF, 80mm and 90mm MAF |
5 reviews for ADTR 96-04 High Flow Intake Pipe
You must be logged in to post a review.
Joshua (verified owner) –
Very tight fit on both the air box and throttle body so I’m not worried about leaks past the MAF. Looks so much nicer under the hood than the stock snorkel tube with my MZT setup.
marco.massa (verified owner) –
Very happy with the purchase and fit of this high quality product. Great customer service and turn around time.
Concededsleet08 –
I love the ADTR Highflow Ziptube! It’s perfect for a better air flow and huge difference in power. This is on my 98 Grand Marquis ls that has a ton of mods like a complete Stainless Works exhaust system, The MZT mod, Stewart Emp High Flow Performance Water Pump, Ford Performance intake manifold swap, 73mm BBK throttle body and plenum and a bunch more. I’m looking forward to installing my Bilstein shocks and other suspension components!
Hey Johnny –
Awesome easy part to install. Pulls a little harder and with the new 70mm throttle body, whew. Thanks Chris
gregorydesigns (verified owner) –
I put a Trick Flow plenum on yesterday and (finally) mounted this ziptube. I’m still using the stock airbox, but just these two mods removed that momentary hesitation I had become accustomed to when I dropped the hammer. Next I install my PI airbox, 80mm MAF sensor and a 70mm TB to really open up the intake. THIS IS A QUALITY PIECE!!!
2000 Grand Marquis aka Marq or The Red Recliner