Installing a PI driveshaft? This spacer allows correct driveshaft length and bolts on!
Fabtech Driveshaft Spacer
$94.95
In stock
In stock
Description
Installing a shorter PI driveshaft? This spacer allows installation without a mess!
- 3/4″ thick spacer for 8.8″ rearends
- Assures correct spline contact on output shaft on transmission
- Use with civilian output shafts, PI aluminum driveshaft and civilian front yoke.
- Includes hardware
- Depending on year of vehicle or driveshaft manufacturer, you may require a front hybrid u-joint when doing the PI aluminum driveshaft swap. Suggest measuring cap size to ensure joint is not needed. (1.063″ to 1.188″ or 1.125″ to 1.188″)
- Includes shipping to the 48 States
—–PI driveshaft upgrade does not work on Town Cars due to longer wheelbase—–
Here’s a great write up about the differences between aluminum driveshafts, the reason a yoke change is required, and the benefits involved in upgrading the driveshaft. Check it out: Thanks to Todd and Pier (Mr 5-Speed) for this handy tech article
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 2 × 2 × 2 in |
| Brand | Fabtech |
You must be logged in to post a review.
Reviews
There are no reviews yet.