Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load–resulting in less bore distortion. The stainless steel outer layers utilizing FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic’s MLS head gaskets, no sealants or re-torque is required.
- Designed to fit 2 and 4 valve engines only, for driver side cylinder head
- Select correct compressed thickness from drop down menu above
- 92mm and 94mm Bore sizes available. CONTACT Chris for more information
- For crazier high boost combinations, can get MLX 4 layer gaskets. Contact Chris for more information
Tech Notes: This is for the left head gasket only!
There are no reviews yet.