The SPC camber kits we sell are different then the SPC kits you can buy elsewhere. Why? They include Grade 9 locknuts and tooth washers to prevent the bolts from loosening after being tightened. The instructions for the kits are available on YouTube: https://www.youtube.com/watch?v=bCen_aVMyco but use the tooth washer orientation and torque values below
Here is the backside of the cross member looking forward and as you can see the order is:
- Camber bolt grade 9 Nut
- Cam washer
- Tooth washer
- Cross member
Make sure the bolt is TORQUED TO 125 FOOT POUNDS!