Looking for the best heads for your 4.6L 2 valve build? Trick Flow Specialties has you covered!
Ford Mustangs
-
-
TCI Deep Pans feature built-in drain plugs and mounting hardware.
-
The Stewart EMP Performance water pump fills an industry void for a high performance water pump for the 4.6L engine. Also perfect as a cost effective original equipment replacement upgrade, these pumps are available in both long and short versions fitting either of the two or four-valve 4.6 Mustang power plants.
-
Get back the power and torque your belt-driven accessories steal!
-
Building a stout modular motor? These beefy flexplates are designed to take the punishment of today’s high horsepower engines..
-
These MSD Ford Blaster Coil-on-Plug ignition coil packs feature a patented winding design and direct bolt-in replacement. The improved spark energy and voltage of the coil packs, combined with their reliability, have made them a favorite of performance enthusiasts.
-
These MSD Ford Blaster Coil-on-Plug ignition coil packs feature a patented winding design and direct bolt-in replacement.
-
These MSD Ford Blaster Coil-on-Plug ignition coil packs feature a patented winding design and direct bolt-in replacement. The improved spark energy and voltage of the coil packs, combined with their reliability, have made them a favorite of performance enthusiasts.
-
Replacing exhaust manifold or installing headers and want the best gasket out there? Check out Mr. Gasket’s UltraSeal exhaust gaskets for the 4.6L SOHC engine
-
Motive Gear ring and pinion sets are engineered, manufactured, and tested for maximum performance.
-
Beef up your rear end with Moser’s 8.8 differential girdle
-
Innovative design makes for an easy installation.
-
Replace your stock oil pump with this trick piece from Melling. High volume and able to handle big HP!
-
Need more fuel in your 2005-2010 Mustang GT? This dual pump set up is what you’ve been looking for!
-
Upgrade from your NPI (non PI) intake for more power with this PI intake manifold swap kit
-
Upgrade to the lightest & strongest modular follower available for 4.6L & 5.4L engines
-
Ford Performance ring and pinion sets are engineered, manufactured, and tested for maximum performance.
-
Ford Performance ring and pinion sets are engineered, manufactured, and tested for maximum performance.
-
Ford Performance ring and pinion sets are engineered, manufactured, and tested for maximum performance.
-
Refresh that old factory 8.8 Trac-Lok unit with Ford Performance’s rebuild kit!
-
Traction-Lok limited slip differentials are made by Ford and have carbon plate-type clutches.
-
Ford Performance’s master overhaul kit is what you need when rebuilding your 8.8 rearend.
-
Beef up your rear end with Ford Performance’s 8.8 girdle
-
Upgrade your stock trac loc unit with the heavier duty carbon clutch discs
-
The basic install kit includes all the shims and seals needed for a gear install without the costly bearings!
-
60 lb/hr, 4-hole, high-impedance fuel injector with USCAR electrical connector
-
Is your motor on it’s last legs? Check out this great short block offering from Ford Performance!
-
Replace your stock studs with these locking header bolts from Ford Performance and Stage 8!
-
Is the front end of your 4.6L SOHC apart? Replace your timing chains and supporting pieces with this complete kit from Ford Performance!
-
Changing heads on your 4.6L SOHC Performance Improved (PI) engine? This kit contains all components necessary for changing cylinder heads on 4.6L engines.
-
Current production plastic intake manifold used on 2001-2004 4.6L SOHC Mustang GT with updated aluminum coolant crossover. Stock replacement for all 2001+ Crown Vic, Grand Marquis and Town Cars
-
Replace your stock oil pump with this high volume unit from Ford Performance
-
Ford Racing camshaft drive kits include all of the components that you need for proper timing. They include high-quality production components for increased durability.
-
Set of 8 Ford OEM coil on plug units found on 99+ 4.6L 2 valve Mustangs and 98+ 4.6L Crown Vics, Town Cars and Grand Marquis.
-
Ford OE Traction-Lok limited slip differentials for solid two wheel burnouts!
-
Pack of 8 AWSFA-32C Ford Spark plugs.
Same heat ranges colder than stock.
-
Pack of 8 AWSFA-22C Ford Spark plugs.
One heat ranges colder than stock.
-
A low-temp thermostat improves performance in two ways: first by increasing the mass flow rate of intake air and second by reducing the engine’s tendency to detonate.
-
Pack of 8 AWSFA-12C Ford Spark plugs.
Two heat ranges colder than stock.
-
Fel-Pro OEM-style oil pan gasket sets are ideal for stock replacement use. Gasket is a one-piece applications are made with Fel-Pro’s exclusive PermaDryPlus molded silicone-rubber construction.
-
The ultimate in gaskets!!!
-
Get rid of that one wheel peel and put the power to the ground!
-
This spring is engineered specifically for Ford modular engines. Comp’s design engieers took the engines RPM capability, lightweight valve train, durability and other unique features, and designed the ultimate modular engine.
-
-
