Ford PI Aluminum Driveshaft Package

Ford PI Aluminum Driveshaft Packag

Ford PI Aluminum Driveshaft Package

5.00 out of 5 based on 1 customer rating
(1 customer review)

Have a civilian car and planning on running some steeper gears?  Upgrade to the police spec driveshaft to reduce drivetrain harmonics and replace those worn u-joints in the process.

$475.16


Product Description


Have a civilian car and planning on running some steeper gears?  Upgrade to the police spec driveshaft to reduce drivetrain harmonics and replace those worn u-joints in the process.

  • Includes Ford OEM aluminum PI driveshaft and driveshaft spacer to ensure proper contact with the output shaft splines.
  • Highly suggested for when you swap to a 3.55 rear axle ratio and mandatory with 3.73 rear axle ratio or higher.
  • Requires re-using stock civilian yoke for proper spacing and increasing spline contact area.

—–May require hybrid u-joint depending on stock yoke and u-joint size—–

—–Does not work on Town Cars due to longer wheelbase—–

Here’s a great write up about the differences between aluminum driveshafts, the reason a yoke change is required, and the benefits involved in upgrading the driveshaft.  Check it out:  Thanks to Pontiac Performance’s for this handy tech article


Additional Information


Weight 10 lbs
Dimensions 15 x 10 x 10 in
Brand

Ford


1 review for Ford PI Aluminum Driveshaft Package


  1. Rated 5 out of 5

    Iosif

    Is it the same part that comes stock on p71 ? or its upgraded one?

    • adtradmin

      Same factory driveshaft as a stock Police Interceptor. A great upgrade for those with a civilian car especially with aftermarket rear gear ratios!

Add a review