Installing a PI driveshaft? This spacer allows correct driveshaft length and bolts on!
Fabtech Driveshaft Spacer
Base Price: $74.95
In stock
Description
Installing a shorter PI driveshaft? This spacer allows installation without a mess!
- Assures correct spline contact on output shaft on transmission
- Use with civilian output shafts, PI aluminum driveshaft and civilian front yoke.
- Includes hardware
- Depending on year of vehicle or driveshaft manufacturer, you may require a front hybrid u-joint when doing the PI aluminum driveshaft swap. Suggest measuring cap size to ensure joint is not needed. (1.063″ to 1.188″ or 1.125″ to 1.188″) If a hybrid joint is needed, choose from drop down menu above.
—–PI driveshaft upgrade does not work on Town Cars due to longer wheelbase—–
Here’s a great write up about the differences between aluminum driveshafts, the reason a yoke change is required, and the benefits involved in upgrading the driveshaft. Check it out: Thanks to Todd and Pier (Mr 5-Speed) for this handy tech article
Additional information
Weight | 1 lbs |
---|---|
Dimensions | 2 × 2 × 2 in |
Brand | Fabtech |
U-joint type | 1.063" to 1.188" Hybrid U-Joint, 1.125" to 1.188" Hybrid U-Joint, None |
You must be logged in to post a review.
Reviews
There are no reviews yet.