OUR Bestsellers

FRDM6067-T46

Changing heads on your 4.6L DOHC engine?  This kit contains all components necessary for changing cylinder heads on 4.6L engines. Includes several parts that make this task significantly easier.  Highly recommended when installing DOHC cylinder heads. Ford torque to yield head bolts Ford multi-layer head gaskets Exhaust manifold gaskets Rubber sleeves to aid in installation NOTE: Only works on 4.6L DOHC engines.  Not suggested for use with supercharged engines!

Sale!
ADTR Hat

Show off your ADTR pride and protect that noggin all at the same time! Price includes shipping to the 48 states! 63/34/3 polyester/cotton/spandex twill Permacurv visor with silver undervisor Sewn eyelets Sizes: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8"), XL/2XL (7 3/8"-8") Available in Grey hat with Black embroidery / Black hat with White embroidery / White hat with Black embroidery See sizing picture to properly measure hat size. Check out the redesigned logo hats available in all sizes and new colors in our apparel section.

Sale!
ADTR Toon

Show your Panther and ADTR love with these new ADTR t-shirts! Black Fruit of the Loom 100% cotton preshrunk t-shirt (6.0 oz) ADTR.net logo on chest pocket Large back logo a toon version of ADTR's shop car Casper See attached measurement picture to figure out correct sizing Larger sizes are available but may need to be special ordered Shipping to the 48 states is included in purchase price! ACCORDING TO A COUPLE CUSTOMERS SIZES RUN SMALL SO IF YOU'RE BORDERLINE YOU MAY WANT TO GET THE NEXT SIZE UP. ONLY AVAILABLE IN XL! Redesigned chest logo and proper fitting Gilden shirts

M-6009-B53

The Ford Racing 5.3L Modular Stroker shortblock is a great way to build modular power - from mild to wild - naturally aspirated or supercharged - 2 valve - 3 valve or 4 valve. Ford Racing Engineers have taken care of the toughest part of building a new engine by designing a strong and durable shortblock that offers a wide range of power possibilities. Ford Racing uses only the best parts, starting with the BOSS Modular block, and adding forged Eagle steel crankshaft, forged Eagle H-beam connecting rods with floating piston pins, and forged Mahle pistons. Bored and stroked to 5.3 liters, thi

Ford 180 degree thermostat
Ford 180 degree thermostat
Base Price $24.99

A low-temp thermostat improves performance in two ways: first by increasing the mass flow rate of intake air and second by reducing the engine's tendency to detonate. Stainless Steel! Allows engine to cool down to lower temperature than factory thermostats! Reduces engine's tendency to detonate! Reduce temperature of both the incoming Air/Fuel mixture and combustion chamber surface! Motorcraft part.  O-ring available separately.

StopTech Slotted Rotors (03+ Rear) Pair

Venting the gas from super heated brake pads improves overall brake performance. Of the various venting methods, slotting has the clear advantage. Slotting, unlike drilling, is not prone to cracking. Plus drilling delivers considerably less active braking surface - 8% less than StopTech Rotors. The tapered slot also channels brake dust and heat away from the rotor and pad for improved braking ability. StopTech Rotors are CNC-machined and come with an anti-corrosion plating that looks great behind custom wheels. CNC Machined! Anti-Corrosion Plating! Slots Keep Rotor Cooler! Slots Kee

StopTech Slotted Rotors (98-02 Front) Pair

Venting the gas from super heated brake pads improves overall brake performance. Of the various venting methods, slotting has the clear advantage. Slotting, unlike drilling, is not prone to cracking. Plus drilling delivers considerably less active braking surface - 8% less than StopTech Rotors. The tapered slot also channels brake dust and heat away from the rotor and pad for improved braking ability. StopTech Rotors are CNC-machined and come with an anti-corrosion plating that looks great behind custom wheels. CNC Machined! Anti-Corrosion Plating! Slots Keep Rotor Cooler! Slots Keep

StopTech Slotted Rotors (96-02 Rear) Pair

Venting the gas from super heated brake pads improves overall brake performance. Of the various venting methods, slotting has the clear advantage. Slotting, unlike drilling, is not prone to cracking. Plus drilling delivers considerably less active braking surface - 8% less than StopTech Rotors. The tapered slot also channels brake dust and heat away from the rotor and pad for improved braking ability. StopTech Rotors are CNC-machined and come with an anti-corrosion plating that looks great behind custom wheels. CNC Machined! Anti-Corrosion Plating! Slots Keep Rotor Cooler! Slo



Summer Spotlight

Mustang

Looking for a performance boost this summer for your Mustang? Check out our selection of performance parts and accessories for your Ford Mustang.

Our Story

ADTR is your home for modular performance! We specialize in high performance modifications for Crown Vics, Grand Marquis and Town Cars as well as modular Mustangs and Lightnings. We promise to provide excellent customer service and parts we would put on our own cars. We offer many parts on our online store, but we can get many more parts upon request.

Crown Victoria Parts and Accessories

We carry a wide selection of parts and accessories for your Crown Victoria. Don't see what you are looking for? Let us know and we will see what we can do!

New Item Offerings

Aftermarket parts are always being developed for your favorite car. We strive to stay up-to-date with our offerings of parts and accessories. Check back regularly to see what new!